Replacement Tecumseh Engine Spare Parts

Replacement spare parts for Tecumseh lawn mower engines including carburettor parts, air filters, gaskets and mufflers. Used spare parts for Tecumseh engines can be found by visiting the Tecumseh Engine Used Parts page.

Please scroll down the page to view all available products.

Ignition Coil Assembly (non-genuine)
Fits Tecumseh vertical shaft over head valve engines including OV358EA, OV490EA, and other OHV models from OHV110 to OHV180.
Replacement part for OEM 36344A.
1 Unit
Price $92.50

FOR SPECIAL ORDER ONLY
Please contact us to order
Product B440-044









Ignition Coil Assembly (non-genuine)
Fits Tecumseh engine models including TVS, H, HSK, LEV, OHH, OH, TVM, TH, LVL, TVXL and more. Replacement part for OEM Numbers 35135B, 35135A, 34443A, 34443B, 34443C and 34443D.
1 Unit
Price $92.50

FOR SPECIAL ORDER ONLY
Please contact us to order.
Product B440-505

Carburettor Assembly (non genuine)
Fits Tecumseh horizontal shaft engine model H30 and H35. Includes carburettor to intake manifold gasket. Replacement part for OEM Number 632615.
1 Unit

Air Filter (non genuine)

Fits Tecumseh Centura engines, as fitted to Victa rotary lawn mowers. Measures 70mm long x 44mm wide x 54mm high.

Replacesment part for OEM Number 36745

1 Unit

Air Filter (non genuine)

Fits Tecumseh 4.5hp, 5hp and 5.5hp engines including LEV100, LEV115, LEV120, OVRM105, RVS115 and RVS120 models. Also fits Concept 50 engines, as fitted to some Victa rotary lawn mowers. Replacement part for OEM Number 36905

1 Unit

Foam Air Filter (non genuine)

Fits Tecumesh engine models TVS 75, TVS 90, TVS 105 & TVS 120 vertical shaft engines, as fitted to rotary lawn mowers. Measures 130mm long x 38mm wide x 29mm high. Replacement part for OEM Number 35604

1 Unit

Air Filter (non genuine)

Fits Tecumseh engine models TVS 75, TVS 90, TVS 100, TVS 105, TVS 120 & TVXL 105 vertical shaft engines. Use with pre filter AIR5118 if required, available below. Measures 183mm long x 56mm wide x 21mm high. Replacement part for OEM Number 35500

1 Unit

Foam pre filter (non genuine)

Fits TVS 75, TVS 90, TVS 100, TVS 105, TVS 120 & TVXL 105. 183 x 57 x 19mm (LWH). Measures 183mm long x 57mm wide x 19mm high. Replacement part for OEM Number 35705

1 Unit

Air filter (non genuine)

Fits most vertical shaft Tecumseh engines including models TVS, TC, ECV, H35, LEV115 & ECV120, as fitted to Victa, Morrison and Masport rotary lawn mowers etc. *Use with pre filter AIR5594 if required. 22mm Inside Diameter x 44mm Outside Diameter x 73mm Height. For pre filter, use AIR5595 listed below. Replacement part for OEM Number 35066

1 Unit

Foam Pre Filter (non genuine)

Replacement pre filter for Air Filter AIR5594, listed above. Fits over the plastic air filter retainer (not inside). 

Replacement part for OEM Number 35435

1 Unit

Air Filter 9non genuine)

Fits Tecumseh 3hp horizontal shaft engines as fitted to cylinder mowers and lawn edgers. Also fits HH60-70, HM80, HS40-50, LAV, VH40-70. Measures 76mm top dia x 95 bottom dia x 51mm high. Replacement part for OEM Number 30727

1 Unit

Air Filter (non genuine)

Fits Tecumseh engine models TVM195, TVXL195, OVXL120-125, OHV12, OHV13 and OHV125. Use with pre filter AIR3994 if required, available below. Measures 203mm long x 51mm wide x 57mm high. Replacement part for OEM Number 35403

1 Unit

Foam Pre Filter (non genuine)

Replacement pre filter for AIR3622 air filter. 

1 Unit

Air Filter (non genuine)

Fits Tecumseh engine models OV358EA, OHV 14, OHV 15, OHV 17, OHV 110, OHV 115, OHV 120, OHV 125, OHV 130, OHV 135, OHV 140, OHV 145, OHV 150, OHV 155, OHV 160, OHV 165, OHV 170. Use pre filter AIR5225 if required, available below. Measures 184mm long x 73mm wide x 77mm high. Doe not include pre filter foam, but this part is available and is listed below (Product AIR5225). Replacement part for OEM Number 36356

1 Unit

Foam Pre Filter (non genuine)

Replacement pre filter for AIR5223 air filter.

1 Unit

Carburettor Rebuild Kit (genuine)
Fits selected carburettors commonly used on horizontal shaft four stroke Tecumseh engines including H25, H30 and H40. Kit includes:
Complete adjustable main jet
Bowl washer
Air screw and o-ring
Float pivot pin
2 x welch plugs
Needle, seat and clip
Bowl o-ring
Bowl drain seal
OEM Number 31840
1 Kit

Aluminium float bowl for use on most Tecumseh carburettors. Measurements:

Top Flange ID: 54mm

Top Flange OD: 55.5mm

Bowl ID: 50mm

Bowl OD: 51.5mm

Overall Height: 29mm

Hole Diametre: 9.7mm

Replacement part for OEM Number 631700.

1 Unit

Needle & Seat Kit (non genuine)

Fits Tecumseh engines models including LAV, V, VH, VM, TNT and TVS series, plus H22-80, HH40-70, HM80-100, HS 638, 650, 670. Replacement part for OEM Number 631021

1 Unit

OUT OF STOCK CAM1444

Float (non genuine)

Brass float to suits CAM1444, listed above. Replacement part for OEM Number 632019

1 Unit

Primer Bulb with Retaining Clip (non genuine)

Please note this primer bulb has NO breather hole. Replacement part for OEM Number 36045

1 Unit

Primer Bulb with Retaining Clip (non genuine)

Please note this bulb has a breather hole. Replacement part for OEM Number 632694A

1 Unit

Primer Bulb & Retaining Clip (non genuine)
Replacement part for OEM Number 632047A
1 Unit

Fits Tecumseh & Walbro carburettor bowls which have drain feature. Includes spring, cap, shaft & seal washer. Replacement part for OEM Number 27136A & 125-403

1 Unit

Fuel Tank Cap (non-genuine)
Fits many horizontal shaft and vertical shaft Tecumseh engines that have plastic fuel tanks. Overall diametre of cap 58mm. Fits 45mm diametre tank neck. Comes fitted with metal splash washer and rubber seal. Replacement part for OEM Number 37845.
1 Unit

Square section. Fits all bowl type carburettors fitted to Tecumseh engines. Measures approx 49mm internal diameter. Fits over carburettor base lip. Replacement part for OEM Number 631028

1 Unit

Head Gasket (non genuine)

Fits tecumseh engine models TV90, LAV30, LAV35. Replacement part for OEM Number 29953

1 Unit

Muffler (non genuine)

Fits many 3hp, 3.5hp Tecumseh engines. Also fits Kirby HK25, HK30 etc. Distance between mounting holes 35mm. Comes with two mounting bolts & gasket. Replacement part for OEM Number 30996

1 Unit

Muffler (non genuine)

Fits many 3hp, 4hp and 5hp engines including TVS90, TVS105, TVS120 and Vantage engine models. Also fits Kirby HK25 and HK30 and Tecumseh H30 and H40 horizontal shaft engines. Distance between mounting holes 35mm. Comes with two mounting screws. Replacement part for OEM Number 35603.

1 Unit

Starter Handle (non genuine)

Fits many Tecumseh recoil starters / pull starters. Plastic. Replacement part for OEM Number 590387

1 Unit

 Starter Cord / Pull Starter Rope (non genuine)

Premium quality starter cord for use with Tecumseh recoil starters. Measures 3mm diameter x approx. 1700mm in length.

1 Unit

Ignition Points Set (genuine)
Suits early model Tecumseh engines that use breaker point ignition systems. OEM Number 30547A
1 Unit

Cut Out Strap / Earthing Strap (non genuine)

Spring steel. Suits many two & four stroke engines. Features two built in spikes to pierce rubber spark plug cap. Attaches to cylinder head using an existing head bolt. 8mm hole.

1 Unit